Flow Tech/MICROFIL CP-101/血管造影劑

MICROFIL® Products

MICROFIL® Silicone Rubber Injection Compounds

【簡單介紹】 MICROFIL® CP-101 造影劑（血管鑄型腐蝕） 熒光探針與細胞染色：用于鑄型腐蝕法（ cast - corrosion techniques），專門設計用于填充大血管（超過100 microns）。雖然 CP-101 也會填充毛細血管，但這些血管片段在將組織暴露于氫氧化鉀溶液時已經去除。 CP-101 制備的鑄型能夠*維持其三圍度。



MV-112	MV-117	MV-120	MV-122	MV-130	MV-132	MV-Diluent
White	Orange	Blue	Yellow	Red	Clear	Clear

 

Prices and Available Colors

Kit	Weight	Color	Price
B	1 lb.	One color	￥2900.00
C	2 lbs.	One or two colors	￥4200.00
D	1 gal. (8 lbs.)	One to four colors	詢價

 

Kit weight is based upon the combined weight of MV-Compound and MV-Diluent only, ie. a 1lb. kit contains 8 oz. of MV compound and 8 oz. of diluent.

Sufficient MV-Curing Agent is supplied at no charge to cure the contents of the kit.

A one pound kit has a volume of approximay 400 ml.

 

MICROFIL® CP-101 For Cast Corrosion Preparations

Kit	Weight	Color	Price
CP-101	1 lb.	Milky	￥2600.00

MICROFIL® CP-101 For Cast Corrosion Preparations 血管造影劑（血管鑄型腐蝕法） 產品關鍵詞： 您現在的位置： 首頁> 供求商機> CP-101-MICROFIL® CP-101 造影劑（血管鑄型腐蝕） 熒光探針與細胞染色

【詳細說明】  Flow Tech, Inc.；MICROFIL®；MV-Compound；MICROFIL®CP-101；Rubber injection compounds 橡膠注射造影劑； Microvascular 微血管； MICROFIL®（血管造影劑）是Flow Tech, Inc.公司的產品。MICROFIL®特別設計用于生理壓力下填充和顯影死 亡動物和術后組織的微血管和其他空間結構。30多年以來，這一創新的產品已普遍用在美國和上各大的高校和 大學，醫院和其他科研組織。 MICROFIL® CP-101用于鑄型腐蝕法（cast-corrosion techniques），專門設計用于填充大血管（超過100 microns）。雖然CP-101也會填充毛細血管，但這些血管片段在將組織暴露于氫氧化鉀溶液時已經去除。CP-101制備 的鑄型能夠*維持其三維度。 MICROFIL®CP-101（血管造影劑）訂購信息：Flow Tech Inc產品，*，咨詢，021- 54736159，。 試劑盒類型 重量 對應顏色 目錄價（元） 試劑盒CP-101 1 lb. Milky奶白色 2600

訂購須知：

1. MICROFIL® CP-101（血管造影劑）產品保質期短，所以不備現貨。所有訂單都是期貨，貨期4周。

2. 試劑盒重量為MICROFIL® CP-101（16 oz.），免費提供足量MV-Curing agent。 MICROFIL®CP-101（血管造影劑）

產品特征： Curing System Stannous octoate in combination with ethyl silicate Mixing Directions Cure is accomplished by mixing CP-101 with 5% ethyl silicate and 5% stannous octoate (by weight). Upon addition of curing agents, working time is approximay 45 minutes. Clearing Procedure Either alcohol-methyl salicylate or glycerin may be employed. Corrosion Preparations Potassium hydroxide may be used in studies where the vessels have a diameter of greater than 100 microns. Corrosion Clearing Procedure Cast corrosion can be obtained as follows: After the casting material has been compley hardened, place the perfused organ in 20% potassium hydroxide or sodium hydroxide solution for several days. The cast should then be rinsed several times in water until all the tissue is removed. The casting time depends both on the concentration of the corrosive solution and on the tissue itself. Lung and heart tissue require 5-6 days in potassium hydroxide whereas bone and brain tissue may require 35% potassium hydroxide for up to 10 days. Advantages MICROFIL CP-101 will maintain dimensional integrity on storage. There is no diluent in the system. MICROFIL®（血管造影劑）的物理特征:

MICROFIL®（血管造影劑）的應用領域

1）In physiology（生理學方面），MICROFIL®（血管造影劑）可視化提供一種方法對特定器官建立準確的血管骨架影 像，從而允許比較正常和異常組織結構。

2）In surgery（外科手術方面），微循環和微解剖的可視化改善了神經、肌腱和血管修復方面的外科技術。

3）Ingastrointestinal research（消化道研究方面），MICROFIL®（血管造影劑）對幾種病理疾病相關的血管形態進行 特征化和變化描述。

4）Injected specimens（注射標本），當保存在水楊酸甲酯或甘油中，也能用作清晰的教學輔助手段。 

Kit weight is based upon the weight of MICROFIL® CP-101 (16 oz.). Sufficient curing agents are supplied at no charge to cure the contents of the kit.

Flow Tech，Inc.是一家馬薩諸塞州公司，于1996年從Boulder公司搬遷，我們能為您提供便利和專業的服務，在大多數情況下，您可以在收到后的一個工作日內發貨。

MICROFIL®化合物設計用于在生理壓力下填充和遮蓋非生存動物和尸體后的微血管和其他空間。這一創新產品已經在美國和的高校，醫院和其他研究機構使用了三十多年。

關于MICROFIL®

MICROFIL®化合物將在生理注射壓力下填充和不透明非生存動物和死后組織的微血管和其他空間。連續閉合的血管系統本身可以通過注射或灌注技術流動。注射后，MICROFIL化合物固化形成脈管系統的三維鑄型。

MICROFIL®MV系列化合物有五種不透射線的顏色以及透明度。MV系列化合物需要水楊酸甲酯或甘油清除順序，由此清除溶液的折射率與組織的折射率相同。這允許對所選擇的血管床進行顯微鏡檢查。

MICROFIL®CP-101化合物適用于鑄造腐蝕技術，用于填充大血管（大于100微米）。雖然CP-101化合物將填充毛細血管，但是當通過暴露于氫氧化鉀溶液除去支持組織時，這些血管碎片。固化時，MICROFIL®CP-101是乳白色的白色。使用CP-101制作的鑄件將無限期地保持其尺寸精度。

MICROFIL®化合物優于以前提供的橡膠注射材料的優勢包括：

• *填充zui小的收縮，增強血管連續性，并在清除的制劑中產生一個生動的，光學清除的樣品，允許研究微循環。
• 色彩多樣性，在循環樹中提供用于顯微鏡檢查和照相插圖的描繪。

Curing System	Stannous octoate in combination with ethyl silicate.
Mixing Directions	Cure is accomplished by mixing CP-101 with 5% ethyl silicate and 5% stannous octoate (by weight). Upon addition of curing agents, working time is approximay 45 minutes.
Clearing Procedure	Either alcohol-methyl salicylate or glycerin may be employed.   See more details.
Corrosion Preparations	Potassium hydroxide may be used in studies where the vessels have a diameter of greater than 100 microns.
Corrosion Clearing Procedure	Cast corrosion can be obtained as follows: After the casting material has been compley hardened, place the perfused organ in 20% potassium hydroxide or sodium hydroxide solution for several days. The cast should then be rinsed several times in water until all the tissue is removed. The casting time depends both on the concentration of the corrosive solution and on the tissue itself. Lung and heart tissue require 5-6 days in potassium hydroxide whereas bone and brain tissue may require 35% potassium hydroxide for up to 10 days.
Advantages	MICROFIL CP-101 will maintain dimensional integrity on storage. There is no diluent in the system.